The CE OSD is small in size, light weight and plug & play.
This OSD is fully automatic without any manual setup; it adapts to 5 or 10 Hz GPS as well as PAL and NTSC video signal input. RSSI (receiver signal strength identification) is also realized on this tiny OSD.
weight: 40g (including mainboard, current sensor, gps and wires)
Your purchase will include:
50A current sensor
10hz mini gps and wires.
THE new v1.5 CE OSD has two osd pattern, you can also switch the imperial and metric mode by pressing the setting button for 4seconds.
NOTE: The OSD requires 6.5-12.6v to operate. The power supply is connected to the camera/transmitter plugs on the OSD, so if you are using a 5V camera, the 5V power must bypass the OSD completely. If you have a 5V camera plugged in to the power connection on the OSD, and you plug the OSD into your main flight battery, you could damage your camera and your video transmitter.
The OSD can be powered by your video system if the power jumper is in position 1-2. Make sure you cover up the exposed pins since they may have live power on them. If you want to power your video system from your main 3s flight battery, move the power jumper to 2-3 and the power from your main battery will power the OSD and will also be passed along to the video system wiring.
EASY OSD Manual
Choose a currency below to display product prices in the selected currency.